Tanning Bed Buck Booster Transformer any size

Description

BUY WITH CONFIDENCE SINCE 1991
ACME SINGLE PHASE BUCK BOOSTER TRANSFORMERS FOR TANNING BEDS
SELECT FROM DROP DOWN BOX THE SIZE YOU NEED
WHEN ORDERING WE NEED TO KNOW THE VOLTAGE COMING OUT OF WALL
ALSO CAN BE USED WITH OTHER ELECTRICAL DEVICES THAT NEED VOLTAGE RAISED OR LOWERED.
A Buck booster is designed to either increase or decrease the voltage leaving the wall and into the tanning bed.
For most tanning beds that run off of 220 Volts, you must have voltage leaving the wall and going into the tanning bed of 220 - 230 Volts.
The beds are designed for run off of this voltage,  if your voltage is above or below this please order a buck booster to adjust the voltage.
Actual product may vary from image shown
IF YOU NEED A THREE PHASE BUCK BOOSTER LET ME KNOW AND I WILL SEND COST
You can purchase these already wired, wired with plugs or unwired. The size you need depends on the amperage of your bed.
The voltage can be set at plus or minus 12/16/24 or 32 volts.
Up to 20 amp bed uses a   .5 kva or .75 will work
Up to 30 amp bed uses a 1.0 kva
Over 30 amps and up to 60 amps    1.5 KVA
Over 60 amps                                     2.0 KVA
3.0 kva ask before ordering
CANNOT FIND WHAT YOU NEED. CONTACT RONNIE THROUGH EBAY MESSAGE AND I WILL GET YOU THE CORRECT ITEM NUMBER.
WORRY FREE PURCHASING!!
ONCE YOU MAKE
PURCHASE
WE WILL CONTACT YOU TO MAKE SURE YOU HAVE ORDERED EXACTLY WHAT YOU NEED
THERE WILL BE AN EXTRA CHARGE FOR SHIPPING OUTSIDE CONTINENTAL USA
WE ARE A FULL SERVICE TANNING DISTRIBUTOR
ABOUT US:
WE CARRY FULL LINE OF :
NEW AND USED TANNING BEDS
TANNING BED PARTS
TANNING BED ACRYLICS
TANNING LOTIONS
TANNING SUPPLIES FOR THE SALON
SUNLESS TANNING BOOTHS
AIR BRUSH TANNING SYSTEMS
OVER 21 YEARS SERVING THE TANNING INDUSTRY
INDEPENDENT FAMILY OWNED COMPANY
Free Technical Support to our customers
WE WILL CONTACT YOU TO VERIFY THAT YOU ARE ORDERING THE CORRECT BUCK BOOSTER
THANKS
RONNIE